Search results

This same thing happened to us back in 2011, they drilled some 1" dia holes to increase the drainage. Finally at the end of may they were able to plaster.

Thanks for the reply, the resistor idea is good, I didn't read this until just now. I did get it working. I first went to setting, then calibration, it only showed pool and air, no solar. I switched the water sensor to the solar, the solar showed 74 so the board was fine, then I hooked the...

My solar temp sensor went on the blink, the temp shoed 255 deg f. I had to change it one other time a couple years back, I bought this, Pentair 520272 Air/Water/Solar Temperature Sensor from amazon, says its compatible with intelletouch, oem Pentair replacement. I hooked it up but now the temp...

up to 72 yesterday pm, solar working.

I had a water issue and the plaster company wouldn't do it until the seepage was nearly gone. We also drilled holes in the side of the shell to help the water drain, I put in an additional french drain above the pool to help, finally they were satisfied and it was plastered about 2 months later...

. It sounds like his drain is not hooked to the pump? only for draining the water.

Me too.

Sorry to hijack but you don't see this mentioned too often. We have backpacked from tuolumne to the valley via halfdome twice and that cascade is incredible, the smooth granite is almost like a pool, and the current a giant swim jet, cold though. Last I was there was 1999. You must have been...

Thats nice, I don't think pentair has that so my pool must be running in order for the solar to work.

72 deg this am, just like I thought it would be. If I'm lucky, with good weather predicted, I may see 76 by this weekend.

Looks really good, is that glass or just the pebble imbedded?

84 yesterday afternoon, weather cooling this week with possible rain on thursday thru sunday, if that happens I'll be stuck in the 70's or worse.

I bought a cover pools cover with my 20' x 40' pool in 2011, it was approx $13,000.

I'm sure nobody has, it was just my way to see if the price / output was about the same, your a little better.

That comes out to 1.31 per kwh for you based on last years production, my cost is 1.50 per kwh based on after tax cost divided by 20565 kwh produced last year.

I was in about the same position as the op of this thread. I now have a 12.1 kv ground mount system that was 44k before the tax deduction. I went oversize to allow for future electrical demands. My payoff was 6 years, only 4 more to go. As of a couple days ago my meter was 1463kwh lower than...

Interesting, thnak for the explanation.

If the skimmer housing is plastic where could the covers get the voltage from?

86 as of this am, solar panels and auto cover work good, all it takes is a few rainy days to drop it by 10 degrees, hoping for at least mid October.

Re: Just starting the process in Northern Indiana - what are your "must haves" in a p exactly, wish i had the deeper ones.

I wish I lived in your world, Even though my csi is always negative I still get scaling in the swg, evident by the white flakes emitted when it self cleans. I think from another thread that JoyfulNoise has borates added?? that may help with the scaling.

When I jump from my wall which is about 3' tall into my 8' deep end my feet touch the bottom, at 6' deep they will definetly touch.

It may be your pump is to close to the bottom of the well, when ours was drilled to 280', the pump was set at 220' so there is plenty of water below it, the water level in the well is 60', never get any sand.

I guess that why i have the pressure side cleaner, goes great with my rotary, I don't have a cell phone. I am happy with its performance, 5 years old now, stays in the pool all the time, there is never any leaves but that is also due to the auto cover. I only take it out is there are a lot of...

Calcium flakes from the SWG, I have the same and there are other threads talking about this. Although since you cleaned the swg and it had no scale, strange.

5kwh per day! that's incredible, you really know how to conserve. I like the fact that I don't have to now with the free power.

Mine was built in 1914, approx 2700 sq ft, upstairs AC, we have our own well. My electric bill was approx $400 per month before, last year I had a surplus and they paid me $140. As I recall I use approx 38kw per day average but I went oversize so if i want a hot tub or to use the RV as a house I...

I've got 44 275w panels for 12.1 kw but the most I have seen at any moment is about 10.1kw. My best day was 83kw produced, most summer days are about 65kw / 75kw, the hotter the panels get the less efficient they are. Also they need to be cleaned periodically, mine are on the ground. You'll be...

I think you would need to bee there all day spraying otherwise many will make it back to report the location. I have a hive about 50' from my pool and have very few bees coming in, it is covered all day so that prob helps, also there is another water source nearby that I see them using. When I...

Usually there is a valve so you can turn off the auto fill, that would confirm if the water is coming from there.