Search results

Hi. I will be re-sealing my pool patio soon. I know it will be slippery after the reseal. Was thinking of using an additive. There are a lot of different types in the market. However, I have heard from many that the anti slip usually wears off after a year. Also, some said they could see it on...

HI. We just opened the pool on Thursday. The pool is running 24/7. Still cloudy. Fully vacuumed twice. Have Slammed it it twice using the info on the app, but still can't get rid of the CC. Air temp has been about 55-65 degrees F. Water Temp: 58 CYA: 35 (In the process of raising) PH: 7.2 FC: 2...

I would think it should be sealed for protection shouldn't it? If it was just because they worried about the liner, then I will seal it. I noticed my friend's pool has theirs sealed. Just didn't know if there was a certain reason why I shouldn't.

Hi. It's pointing to the approx 4" concrete edge above the liner that is the edge of the stamped concrete patio.. Should I seal that part as well? The people that did it originally didn't seal that area.

Hi. I am about to reseal my stamped concrete pool patio. It was previously sealed with an Acrylic sealer with a color added to it. It lasted quite a while. When they originally sealed the patio, they did not include the egde of the patio within the pool area itself. Shouldn't that concrete be...

This will really sound like a silly question, but here it goes. …. I will be storing my cartridge filter and oring inside for the winter…..Should I put lube on the oring for storing and/or before use in spring? Didn’t know if it dries out in storage. Thanks Rich

Is it ok to use the Blaster Silicone Lubricant spray on O’Rings? Especially on the large O’Ring on the cartridge filter ? Thanks Rich

Is it recommended to put O Ring lube on the Oring on the plug (see photo) when closing/winterizing the pool ? Thanks Rich

I’m trying to decide if I should remover my skimmer weir when I winterize my inground pool. I haven’t done so in the last few years, but have seen articles saying you should. Any thoughts on if and why I should remove it or not? Thanks Rich

Thanks. I also add about 5 gallons of liquid chlorine to the water after draining. Not sure if needed, but water seems clear at opening. :)

Hi. I've read the closing an inground pool process. It says to SLAM a few days before, and let it come down to normal as long as the Overnight test holds. 1. However, if I consistently do not have any CC showing, do I need to SLAM at all before closing? 2. I do add polyquat 60 before draining...

For closing the pool this fall I always use pool safe anti freeze. I saw this at Home Depot for a fairly low price. Says on bottle that it is safe for swimming pools. But the description says …. 128 fl. oz. Ethyl Alcohol -50°F Universal Non- Potable RV Antifreeze. Is Ethel alcohol safe to use...

Hi. Here in the North East, at the end of the summer, I take the solar cover off the reel, fold and store it. I used to also take the reel apart in order to fit it into the pool house. However, as most know, over time that disassembly and reassembly causes it to weaken and sag. This year I am...

Yes, I do use the RV stuff. Thanks

I have a new cartridge filter. I always add anti-freeze when closing pool. My question is, when I turn it on in the spring, will the anti-freeze that will be in the one suction line (skimmer) damage the cartridges in the filter ? Can you run the filter without the cartridges while clearing the...

Have you tried Tplus2? I saw that advertised as well. But, I believe Lowes near me does have Both Oatey and Tplus2.

Thanks. What pipe dope do you recommend? should you leave the pump off for a while after installing with pipe dope? ... even though I know it doesn't harden. Lastly, how much pipe dope should be applied. I've seen it in grey and I've seen it in black?

So I ran the water test again and found the leak is at the 2” to 1-1/2” reducer fitting in the front of the pump. I tried tightening it as far as I could go without forcing it further. I was afraid to crack something. Should I remove and retape the fitting or do you recommend getting a new...

Yes, the connections into the pump were added, not the connection on pipe from skimmer. The long ball fitting in the front of the pump was from the other pump. (Not new). Again, I assumed since no leaks around the fittings and treads, then no air leak. Guess that's incorrect though. I did pour...

When running the new VSP pump at 3450 rpms, the pressure is normal and still air in system. Not a 100% sure when it started, but I think it started this season when I installed the new VSP pump.

Would pushing water back with a shop vac .. blower end … work to clear the skimmer line similar to using a water hose ?

Hi. I don’t have a valve to shut off that vacuum line. I only have the skimmer, no main drain. The skimmer is more than 1/2 full, so I don’t believe there is air coming in from there. Thanks Rich

Help. I'm very frustrated. I took the fitting apart in front of the pump. The o ring looked good. It's actually glued in to the fitting seen in previous picture. I put lube on it and realigned it so the connection was straight on and then ran the pump at full 3450 rpms. No change. Please help...

There is an "O" ring. It's probably time to replace it as well. Similar to attached picture.