Liquid chlorine can be great for pools and doesnt add cya like granular shock, however it expires or weakens relatively quickly. Some writeups claim that in 6 months on the shelf, the 12% liquid shock will have little to no chlorine left. Buying in springtime is the most perilous if it is left from last year. So how can you be sure?
First look at the date code. The first two numbers are the year like 23. The next 3 numbers are the day, like 334 would be about Dec 1, of last year.
So that shock would be suspect, and might waste your time and money. I wouldn't buy it unless I had no better choice.
Tap water has a trace of chlorine, under 1ppm, so this test will slightly overstate chlorine ppm. That's a minimal effect. The test below is based on the ordinary shock ratio of 1 gal to 10,000 gals water.
Fill a 5 gal bucket with tap water. Add just over 1/3 (.038) of a teaspoon of your 12% bleach (but really a shy half tsp is close enough)
Read your recently bought test strips (old strips read wrong) or other testing means, and if your shock is fresh you should read about 12 ppm (or 10-15.) if you are using 6% bleach it should read about 6ppm so you will know it's full strength.
There's so much expired or weak shock out there especially at Walmart, this testing might save you lots of time and money! If it doesn't measure up, perhaps you can take it back.
First look at the date code. The first two numbers are the year like 23. The next 3 numbers are the day, like 334 would be about Dec 1, of last year.
So that shock would be suspect, and might waste your time and money. I wouldn't buy it unless I had no better choice.
Tap water has a trace of chlorine, under 1ppm, so this test will slightly overstate chlorine ppm. That's a minimal effect. The test below is based on the ordinary shock ratio of 1 gal to 10,000 gals water.
Fill a 5 gal bucket with tap water. Add just over 1/3 (.038) of a teaspoon of your 12% bleach (but really a shy half tsp is close enough)
Read your recently bought test strips (old strips read wrong) or other testing means, and if your shock is fresh you should read about 12 ppm (or 10-15.) if you are using 6% bleach it should read about 6ppm so you will know it's full strength.
There's so much expired or weak shock out there especially at Walmart, this testing might save you lots of time and money! If it doesn't measure up, perhaps you can take it back.
Last edited: