Tracking my incredible shrinking CYA

Katodude

Silver Supporter
Aug 22, 2017
2,640
West Palm Beach/Florida
Pool Size
15000
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite (T-15)
I am going to start keeping a log of my CYA here to determine what if anything is up. I have gone and bought the expensive CYA from Doheny.

CYA is 70. I am going to bump it up to 80 today and then measure over the next several weeks.
 

Attachments

  • IMG_7018.jpeg
    IMG_7018.jpeg
    355.9 KB · Views: 31
  • IMG_7017.jpeg
    IMG_7017.jpeg
    338.2 KB · Views: 29
  • Like
Reactions: Mdragger88
Kato,

I just bought some CYA from Doheny...

I too felt that my cheap CYA was not lasting as long as it should.. But, have no data to prove it.. :(

This will be my first year with Doheny CYA, so it will be interesting to see if their CYA is any better than what I was buying before.

Thanks,

Jim R.
 
I have used the Puritech stuff, and the RX Clear in the past. Both seemed to raise my CYA but the CYA seemed to disappear very quickly

So someone reported that the Doheny stuff is better so I bought 50lbs of it and will be running a test. I have a sock dangling right now. Will measure in 2 days an post again. Should be around 80ppm.

I will then measure and report back on a semi regular basis.
 
Ok CYA is 80. Ideal level for my pool for this time of year. Let’s measure again in a few weeks. I will track rainfall to make sure we dont lose water through the auto drain.
 

Attachments

  • IMG_7019.jpeg
    IMG_7019.jpeg
    215.1 KB · Views: 19
  • IMG_7020.jpeg
    IMG_7020.jpeg
    298 KB · Views: 19
So 2.5” of rain yesterday. Lost about 1” through the overflow. Pool is also at least an inch higher than normal. Tested CYA and got 70. Which I will attribute to some dilution and loss of water. Will wait a few days and bump back up to 80. FC is a little low so need to go pick some up and add that first. Also used the opportunity to clean the dinky little filter.
 

Attachments

  • IMG_7032.jpeg
    IMG_7032.jpeg
    306.9 KB · Views: 7
  • IMG_7031.jpeg
    IMG_7031.jpeg
    313.7 KB · Views: 7
  • Like
Reactions: Newdude
CYA was maybe a tad under 70, but let’s call it 70 for now. No rain since the last test. So adding some CYA now as we are getting full sun. I would like to have it around 80-90 and form a new baseline. Will measure again on Sunday or Monday and we will start tracking from there.

As a side note, pool is now hitting 88 degrees so I am not sure how that factors into degradation.
 
  • Like
Reactions: Newdude

Enjoying this content?

Support TFP with a donation.

Give Support
Crud, I cant remember if I added any CYA or not. Going to start logging additions in pool math from now on.

Anyway no rain, and CH and Salt is rising so no leak. CYA is 70
 

Attachments

  • IMG_7044.jpeg
    IMG_7044.jpeg
    248.3 KB · Views: 3
  • IMG_7043.jpeg
    IMG_7043.jpeg
    260.9 KB · Views: 3