Recent content by Mariok

Hi James saw your thumbs up above does the amps and voltage look like they are in range? I saw one of your other postings that made me question those readings one talked about a bad flow switch and not to operate if bad, all lights are as they should be nothing on that shouldn't be, please let...

Hi James put in new cell and everything is working again just want to make sure that cell voltage and amps in good range voltage when generating salt moves up to around 26 when turn dial to stop generating salt it reads 31.9 amps when generating salt reads 3.6 when off reads 0.00 Thanks again...

Thanks again for your help

When I turned it off and back on again, it went back to 31.9 which is holding at right now

The voltage went down to 30.8 when I turned it on and off

Here is what I bought

One other thing I bought the Hayward salt generator from Amazon June of 2022 do you know what the warranty is could not find anything on Amazon

I did just replace the thermistor and still showing 300 plus the check salt and inspect cell lights on, salt cell is less than 2 yrs old and my pool is around 10-11,000 gallons it is not too big. Here are the numbers nothing changed since changed thermistor, also last week before the problem...

Hi Marty your solution for the thermistor worked perfect so havent had any issues until other day no chlorine showing after testing went to control box and said 300 plus the check salt and inspect cell lights on, a week before it was 3000 took a sample to pool store and said salt was ok but...

When I get back to the house I’ll take a picture of it and send it thanks for your help I just ordered the part you recommended specially since it was so cheap

I’m about sure that wire goes to the control box on the wall for the solar heater control that is next to the Hayward box

That is the valve that controls the solar heater it does work I’ve seen it open and close