Recent content by jsygrls

The motor can be replaced or the entire timer. My local Home Depot carries both.

Did you clean your filter? With algae you'll be doing this frequently and adding lots of chlorine. Post your latest test results. What test kit do you use? Fill out your signature with all your equipment for all to see. Have you performed the OCLT?

So I've been kicking around the idea of SWG CircuPool RJ-60 PLUS , DIY, and need some hand holding on its ideal placement. Please take a look at some photo's. Am i making more out of this than necessary? 1. Remove the in (not in use) inline chlorinator, create a loop and add the SWG and flow...

So until a TFP guide comes along I thought I would take a minute to say hello , were just down the road a bit from you. First off I do NOT have a SWG so lets leave that to someone else. Your FC is high if your result was tested correctly. Did you use the 10ml measurement on the vial and drop...

https://www.harborfreight.com/36-in-pickup-and-reach-tool-61413.html?_br_psugg_q=reach+tool This will keep your arm are out of the cold or suspect pool water. I use an empty Gatorade bottle with the reach tool.

So, until AJW22 gets back lets do this. Please fill out your signature it is very helpful , then everyone here will know what equipment you have. Do your have any automation? Picture of automation and breaker box(S). Very helpful. You may be test for line voltage at sub panel, automation ...

https://www.harborfreight.com/36-in-pickup-and-reach-tool-61413.html?_br_psugg_q=reach+tool

I use this for the skimmer basket removal and taking water samples throughout the winter ((with a Gatorade bottle), you may want to give it a go.

What are you using to test your water with? And can you post those results?